Solar
Solar · Cleaning

Solar panel cleaning

Cleaning for solar panels on the Front Range, for systems we installed and systems we didn't. While we are up there we check the mounts, wiring and flashing, and we check production in your monitoring app before and after.

Written price before work starts

The price depends on the roof, how many panels there are and how they are laid out.

Top-down drone view of a house with groups of black solar panels on several roof faces.

Good fit if

  • Dust, pollen or wildfire smoke has built up on the panels
  • Bird droppings are shading part of the array
  • Your monitoring app shows a drop you can't explain
  • Your installer is gone and nobody has looked at the system in years

When is cleaning worth it in Colorado?

Less often than the dust suggests. Snow and rain do most of the work here, and a light film of dust usually costs little. Cleaning starts to make sense when something specific has built up: summer dust that rain hasn't moved, pollen, wildfire smoke residue, or bird droppings shading part of the array. If your monitoring app shows a drop that weather doesn't explain, that is a reason to look. This page is part of our solar hub.

What does a cleaning visit include?

The cleaning itself is simple: water and a soft brush made for panel glass. Never a pressure washer, which can force water where it doesn't belong and damage the seals.

The useful part is everything around the cleaning. We check production in your monitoring app before we start, so there is a before number. While we are up there we look at the mounts, the wiring and the flashing, and we photo anything that needs attention. After the cleaning we check the app again, so you can see what changed.

Who is it for?

Anyone with panels on the roof, whether we installed them or not. A lot of the systems we look at were installed by companies that are gone now. If that is you, a cleaning visit is also a good first look at a system nobody has checked in years. See solar service and repair for the bigger list of what we do on other companies' systems.

Can I just do it myself?

We would rather you didn't. The panels are not the risky part. The ladder and the roof are. Stay off the roof, and call us if the array needs attention.

Request a cleaning visit.

How it works

From first call to finished job.

  1. 01

    Production check first

    We look at your monitoring app before we touch anything, so there is a before number to compare against.

  2. 02

    Rinse and wash

    We clean the glass with water and a soft brush made for panels. Never a pressure washer.

  3. 03

    Mounts, wiring and flashing

    While we are up there we look at the mounts, the wiring and the flashing, and photo anything that needs attention.

  4. 04

    Production check after

    We check the monitoring app again after the cleaning and go over what we found with you.

Questions about solar panel cleaning

Do I need my panels cleaned?

Sometimes. Snow and rain handle most of it in Colorado. Cleaning is worth a look when dust, pollen, wildfire smoke or bird droppings have built up, or when your monitoring app shows a drop that weather doesn't explain.

Does snow damage solar panels?

No. Panels are built for snow load, and on a sunny Front Range day snow usually slides or melts off on its own. Output drops while the panels are covered and comes back when they clear.

Can I clean my panels myself?

We don't recommend it. The risk is the ladder and the roof, not the panels. Never pressure-wash panels, and stay off the roof. If the array needs cleaning, have someone with the right equipment do it.

Will you clean a system you didn't install?

Yes. We clean and check systems any installer put in, including systems whose installer is gone.

Answers on this site are general information about roofing and solar in Colorado, not legal, tax or insurance advice. Programs, codes and utility rules change; your written proposal and your insurer or utility have the final word.

Get an estimate

Tell us about the roof, the panels or the building.

Send the form or call. We set up an assessment, then send a written proposal with the scope and the price.

Monday–Friday 9 a.m.–5 p.m.

Next step

Get a written proposal before anything starts.

Tell us about the roof, the panels or the building. We assess it, then send the scope and the price in writing.