Learn

Home solar

What happens to solar panels in Colorado snow?

By Nate Hadachek, CEO, Impact Energy & RoofingPart of Solar

Snow usually clears from solar panels before it clears from the rest of the roof. The panels are dark, smooth and tilted, so they warm up and the snow slides off. Production drops while panels are covered and comes back when they clear. A system's yearly estimate already counts Colorado's snowy days. Don't climb up to clear them.

After a storm your whole roof is white. By the next sunny afternoon the panels are usually bare while the shingles around them still hold snow.

Why does snow come off the panels first?

Three things. The panels are dark, so they take in heat from the sun even through a thin layer of snow. The glass is smooth. And the panels sit at a tilt. Once a little melt starts under the snow, it slides. In Nate's words, the snow doesn't stay on there very long.

How much production do I lose?

While the panels are covered, very little gets made. Once they clear, cold sunny days are good solar days. Across the country, Sandia National Laboratories reports published estimates of snow losses from 1 to 12 percent a year, depending on location and weather 1. Front Range sun works in your favor.

Is winter counted in my system's estimate?

Yes. When we design a system, the production estimate uses historical weather for your area, including how many days panels are likely to be covered in an average winter. A slow December is expected. It is built into the yearly number. See what size solar system your house needs.

Should I clear the snow myself?

No. Nobody should be on a snowy roof, and a roof rake or broom can scratch the glass or catch wiring. Let the sun do it.

What should I watch for after a storm?

  • Snow sliding off the array. Keep the area under the roof edge clear.
  • Ice at the eaves. Ice dams are a roof and attic issue, not a solar issue, and worth a look if they keep forming.
  • Your monitoring app once the panels are clear. If production doesn't come back, see how to tell your solar is working.

What about hail?

Different problem, different page. See does hail damage solar panels.

Save this

  • Snow clears from panels before the rest of the roof.
  • Low production on covered days is normal and already in the yearly estimate.
  • Stay off the roof. Don't rake or brush the panels.
  • Keep the ground below the array clear after a storm.
  • Check the app once the panels are bare.

Questions about a system we installed or one we didn't: see solar service and repair or call (888) 240-1131.

Questions

Do solar panels work in winter?

Yes. Panels run on light, not heat. Days are shorter, so winter months produce less than summer months, and the yearly estimate accounts for that.

Should I brush or rake the snow off my panels?

No. A wet or icy roof is dangerous, and tools can scratch the glass. Colorado sun usually clears the panels within a day or two.

Why is my December production so low?

Short days and a low sun angle, plus any days the panels were covered. Compare it with last December, not with July.

Can snow sliding off panels cause problems?

It can come down all at once. Keep cars, walkways and plants clear of the roof edge below an array after a storm.

Does heavy snow damage panels?

Panels and racking are built and permitted for the snow loads in your area. If you see a panel that looks shifted or cracked after a storm, call for service.

Sources

  1. [1]The Impact of Snow on PV Performance. Sandia National Laboratories
Get an estimate

Tell us about the roof, the panels or the building.

Send the form or call. We set up an assessment, then send a written proposal with the scope and the price.

Monday–Friday 9 a.m.–5 p.m.

General information about roofing and solar in Colorado, not legal, tax or insurance advice.

Answers on this site are general information about roofing and solar in Colorado, not legal, tax or insurance advice. Programs, codes and utility rules change; your written proposal and your insurer or utility have the final word.

Next step

Get a written proposal before anything starts.

Tell us about the roof, the panels or the building. We assess it, then send the scope and the price in writing.